Wallit Panel

Low-profile wall-mount communication-hub enclosure

At 27-inches width and only 10-inches depth, Wallit™ Panel is ideal for small spaces and high-traffic areas, providing secure mounting for 19 and 23" patch panels and communication accessories.

Two sets of mounting profile-lances positioned at 3" vertical intervals along the rack's back panel allow for 19 or 23" mounting. Two included mounting brackets designed to accept a variety of equipment depths - one staggered and one tilt-out - get attached and secured to the back of the rack at adjustable heights. The mounting brackets' hooks slide into the offset profile-lances on the rear of the wall-mount enclosure and get secured with two screws. Additional mounting bracket sets can be added.

The staggered bracket features two mounting areas: 2U at the top; 4U at the bottom; 4-inches apart.

The 4U tilt-out bracket allows tilting the mounted patch-panel out and down, for easy access to its rear, facilitating convenient punch-down access.

All mounting brackets come with pre-tapped #12-24 mounting holes which are best suited for use with Rackit's self-tapping mounting screws (not included).

Unused profile-lances on the rack's back panel along with additional profile-lances along both sides of the rack accept optional accessories such as cable rings and fiber boxes.

Three (3) protective grounding studs are provided (one on each side and one on the back panel), along with a quick disconnect grounding jumper wire that electrically bonds the enclosure's door to the enclosure frame.

Cable conduit knockouts are abundant, with three 1, 2, 3, and 4" nominal concentric knockouts on top; two 1 and 2" conduit knockouts at the bottom; twelve 1" conduit knockouts on each side, six at the top and six at the bottom of the rack.

Wallit Panel's front door is field-reversible, featuring nine rows of vents both at the top and at the bottom. Wallit Panel's vented bottom can also accommodate one (two with the 48" tall model) optional 75 CFM exhaust fan assembly.