• Two sets of mounting profile-lances along the back panel to allow for 19 or 23" mounting

• Includes one pair of #12-24 staggered brackets and one pair of #12-24 tilt-out brackets; additional bracket sets can be added

• Staggered and tilt-out brackets can be positioned at various vertical locations within the rack

• Hook-mounted brackets and accessories slide into offset profile-lances on the rear of the enclosure and are retained in position by screws (field adjustable)

• Cable access: 1, 2, 3, and 4" nominal concentric conduit knockouts on top; 1 and 2" conduit knockouts on bottom; 1" conduit knockouts on each side

• Cable management profile-lances along both rack's internal sides accept optional cable rings and fiber boxes

• Optional 1U bracket set

• Optional cable management rings

• Optional fiber box assembly

• Field-reversible front door

• Perforated front door with key lock

• Door is grounded to enclosure

• Optional fan and filter assembly

Oblong wall-mounting holes

• Wallit Panel 24: 16 (6 at top; 6 at bottom; 2 on each side of the back opening)
• Wallit Panel 36: 18 (6 at top; 6 at bottom; 6 at 1/2 height)
• Wallit Panel 48: 24 (6 at top; 6 at bottom; 6 at 1/3 height; 6 at 2/3 height)

Rows of back mounting profile-lances

• Wallit Panel 24: 7
• Wallit Panel 36: 11
• Wallit Panel 48: 15
• Spaced 3-inches apart (vertically)
• Spaced to accommodate 19" or 23" mounting

Rows of side mounting profile-lances

• Wallit Panel 24: 3 (3 profile-lances at the top; 3 profile-lances at the bottom; 4 profile-lances at the middle)
• Wallit Panel 36: 5 (3 profile-lances at the top; 3 profile-lances at the bottom; 4 profile-lances at each middle)
• Wallit Panel 48: 7 (3 profile-lances at the top; 3 profile-lances at the bottom; 4 profile-lances at each middle)

Back access opening

• Dimensions: 12:"W x 10"H
• Wallit Panel 24: 1 opening
• Wallit Panel 36: 2 openings
• Wallit Panel 48: 3 openings