Plyant CQ Enclosures

Plyant CQ Cable-Management Accessories

• Cable Management Lacing Bars – In a simple yet effective way to handle vertical & horizontal cable runs inside the rack, Plyant CQ optional cable management Lacing Bars get installed independently of the mounting rails, thus eliminating any restrictions on positioning for flexible cable management. Optional RackiTie cable straps provide good means of securing bundles of cables to the Lacing Bars.
• Vertical Cable Trough – Providing meticulous management of large vertical cables runs, especially when used in conjunction with optional RackiTie cable straps, up to four (4) optional Vertical Cable Troughs can be installed to Plyant CQ internal corner posts.
• Top Waterfall Cable Tray – Optionally gets installed at the top of any Plyant CQ cabinet, either in the front or in the back to facilitates convenient passage of cables between networked racks, providing a natural cable-flow from horizontal to vertical cable runs.
• Front-to-Back Cable Tray – With its extra width designed to accommodate cable-intense installations, Plyant CQC can be fitted with multiple optional horizontal front-to-back cable trays, supporting extensive cable bundles branching out of vertical runs at any height, running from the cabinet's front to its back and vice versa.
• Ladder-Rack Bracket Kits can optionally be installed on top of any Plyant CQ cabinet, accommodating either 12" wide or 24" wide overhead Ladder cable-management systems.
• Brush-Grommet Kits – To keep the dust out and to maintain thermal efficiency, Brush-Grommet Kits are available for side cable-access cutouts (41U and 44U models), for CQC models top cable-access cutouts and for 41U and 44U models for closing the gap between the mounting rails and the cabinet's side panels.

Plyant Zero-U PDUs

Plyant Zero-U power distribution units (PDUs) – installed vertically in a Plyant rack occupying no rack-space – get pre-installed when ordered with the rack.

Plyant PDU Mounting Brackets are also available for mounting universal Zero-U PDUs in the inside corner of a Plyant enclosure.

Model	Length	Outlets	Amps	Volts	Plug	Receptacles	Cord Length	Special Features
PLT8-15	25-inches	8	15A	125V	5-15P	5-15R	15-feet	Circuit Breaker
PLT16-15	49-inches	16	15A	125V	5-15P	5-15R	15-feet	Circuit Breaker
PLT16-15S	49-inches	16	15A	125V	5-15P	5-15R	15-feet	Surge Suppressor
PLT16-20	49-inches	16	20A	125V	2-20P	5-20R	15-feet	Circuit Breaker
PLT16-20L	49-inches	16	20A	125V	L5-20P Twist-Lock	5-20R	15-feet	Circuit Breaker

Other Accessories 

Cable Management   Specifically designed for re-use and characterized by the ease of branching cables in-and-out, Rackit's cable-management products are designed to address the daunting task of managing wires and cables within a rack-installation.	Keyboard/Mouse Accessories   Keyboard/mouse trays and integrated keyboard/mouse/monitor shelves, Rackit's keyboard/mouse accessories provide a useful and convenient way of mounting your keyboard mouse and monitor in your rack.
LCD Consoles   1U LCD keyboard/mouse rack-mount console drawers featuring 19" and 17" lap-top-style folding display, single-rail and dual-rail models, integrated KVM switches compatible with USB, Sun and PS/2 servers for local access at the rack or remote access over IP.	Environmental Monitoring Systems   External Threat Detection (ETD) systems provide early warning of conditions that can lead to equipment failure, giving you the valuable lead-time you need to save your network from costly downtime.
Remote Power Control   Remote power control over IP, providing the ability to remotely power on, power off or cycle power to any connected IT or network device.	Power Distribution Units (PDUs)   Whether occupying zero-U or rack-mounted in your rack, Rackit's PDUs offer a wide selection to effectively distribute and mange power in your rack installation.
Cooling Accessories   Exhaust fans, air-blower and controller, all designed to enhance and regulate airflow inside an enclosed equipment rack to keep its temperature cool.	Filler Panels   Used to close up un-used space in the rack, Filler Panels are also a cost-effective cooling accessory, ensuring that mounted devices do not recycle warm exhaust air.
Shelves   An assortment of models, either stationary or pull-out (sliding), Rackit's shelves are engineered to support the weights of any IT gear in either 4-post or 2-post racks.	Drawers   2U, 3U and 4U lockable rack-mount storage drawers, designed for securely storing odds and ends in a 2-post or 4-post 19" rack.
Mounting Screws   Used with different styles of racks (pre-tapped #10-32, #12-24 or square holes), rack-mounting screws are used to mount equipment, shelves, and accessories onto racks.	Grounding Accessories   Copper bus bars and grounding kits are used to ground networking equipment to the building's ground outside of a rack.
Conversion Kits   Conversion kits are sets of brackets of various heights that convert the width of a wider rack (24" or 23" wide) to conform to 19" EIA rack-mount standard.	Back Support Kits (For 2-Post Racks)   A depth-adjustable bracket kit designed to add additional support to a 2-post relay rack (such as Standard Relay Rack or Strandit).
2-Post Server Mounting Kits (For 2-Post Racks)   RMS244 2-Post Server Mounting Kit is an innovative rail system that supports mounting a 1U server into a 2-post rack system.	Ladder Brackets (For Standard Relay Rack)   A bracket kit designed to support the connection of Rackit's Standard Relay Rack to "ladder" rack systems that are typically used in communication centers and server rooms.
Rear-Mount Support Kits (For 2-Post Racks)   A Kit designed to work with Rackit's Strandit 85 rack and Standard Relay Rack, to provide additional rear support for any front mount equipment.	Wallit™ CPU   Wall-mount brackets accommodating desktop/tower computers for getting the computer off the floor (or off the desktop).