Open Wall-Mount Racks

Wall-mount telco/network open rack solutions

Wallit™ wall-mount telco/network open rack-mount solutions are designed for front-mounting IT network and telecommunication equipment onto the wall.

Use Wallit open racks to mount:

• Patch panels
• Ethernet switches
• Network hubs, routers, firewalls
• KVM switches

Rackit's open wall-mount telco/network rack-mount solutions typically get implemented in communication-closet space-saving applications where physical security is not an issue, facilitating telco, distribution, smaller intercom, paging, and security systems, CAT-5, fiber, voice and most any communications mounting needs.

Wallit™ wall-mount brackets and boxes also facilitate small 'communication closet' applications for front-mounting data/telco infrastructure such as patch panels, Ethernet switches, hubs, routers, firewalls, KVM switches, etc.

A full range of shelves, cable-management systems, powere distribution units (PDUs) and accessories are available to complement the racks functionality, making Rackit's open wall-mount racks suitable and adaptable to a variety of data and telecommunication applications.

Available models are suitable for various applications:

• Easy-access mounting, with equipment mounted on a gate that swings out or a frame that tilts down for easy rear access
• General purpose
• Flush mounting, with equipment mounted flush (and parallel) to the wall (or ceiling, or under a desktop) for space-saving applications
• Shallow mounting for patch-panel and other non-deep equipment
• PC mounting, for getting tower PCs off the floor
• Side mounting, with 4-post equipment mounted sideways, providing excellent front and back equipment-access while occupying a smaller footprint

Easy-access racks

Easy-access wall-mount racks feature a rack-mount frame that either tilts-down or swings-open (to either side) for easy access to install and manage patch panels, routers, hubs, switches, cabling, and other networking devices.

A pivoting rack-mount frame swings out or down (varies by rack-model) to easily access the rear of installed network equipment. Integrated positive stop prevents the gate from being opened more than needed, to avoid causing damage or stress to cabling and connection points.

A latching mechanism securely holds the swing gate in the closed position when equipment installation or maintenance is complete.

General purpose racks

General purpose wall-mount racks accommodate 12-18 inches of equipment depth in racks supporting 8-21 rack-units for 19" or 23" or 24" rack-mount equipment.

	Special Characteristics	Models	Mounting Depth	Weight Capacity	Mounting Rails	Highlights
Wallit Comm	Accommodated cage-nuts or #10-32 mounting 2-post mounting	12U 16U 21U	12 inches or 18 inches	300 lbs.	Universal (square-holes) and #10-32 pre-tapped	• Self-squaring design for easy field assembly • U-shaped upright rail channels feature pass-thru holes for easy cable access
Wallit Flex	Mounted equipment determines the rack's width 2-post mounting	8U 12U	18 inches	250 lbs.	#10-32 pre-tapped	• The rack adjusts to the width of the mounted-equipment • Some models include a 16"-deep cantilever shelf • Two-piece design

Flush mounting racks

	Special Characteristics	Models	Mounting Depth	Weight Capacity	Mounting Rails	Highlights
Wallit Box	Superb equipment protection Mounts equipment parallel/flush to the wall or flat below a ceiling or under a desktop 2-post mounting	2U 4U	Unlimited	50-75 lbs.	#10-32 pre-tapped	• Removable cover • Vented side-panels • Mounting rails can be recessed for extra equipment protection • 16 inch on-center wall-mounting holes • Wall-mounting holes provide for left, right, or vertical equipment orientation • Provisions for optional RackiTie cable straps
Wallit Flush	Mounts equipment parallel/flush to the wall or flat below a ceiling or under a desktop 2-post mounting Optional 4-post mounting	2U 3U 4U	Unlimited	150 lbs.	Universal (square-holes) or #10-32 pre-tapped	• 16 inch on-center wall-mounting holes • Two racks mounted opposing each-other can support 4-post-mounting equipment

Shallow mounting racks

	Special Characteristics	Models	Mounting Depth	Weight Capacity	Mounting Rails	Highlights
Wallit Bracket	A swing-out hinged bracket on one side facilitates easy access to equipment's rear 2-post mounting	1U	6 or 12 inches	20 lbs.	#12-24 pre-tapped	• Quick-release retractable pin fastener facilitates swinging equipment out for rear maintenance
Wallit Hinge	A swing-out hinged bracket on one side facilitates easy patch-panel termination during installation 2-post mounting	1U 2U 4U 6U	5⅞ inches	20 lbs.	#10-32 pre-tapped	• Provisions for optional RackiTie cable straps • Side (elongated) cable-access cut-outs

Side mounting racks